late 80's custom built on road windup

6 Berth
based on the Jayco “Finch” model
custom made late 1980’s to mid 1990’s
NSW rego to August 2010

 

features

very stable to tow
easy to set up & comfortable to sleep in
re-wired & lights replaced August 2007
new jockey wheel August 2008, very easy to hitch up
new bolts welded to height stabiliser legs in August 2008. (One of these has come off again & needs the nut spot welded back on)
new UV-proof shock cord fitted to sleeping area canvas covers
canvas in good used condition throughout, has been Scotchguarded
heavy canvas awning in excellent used condition
additional weather shields fit into slide-in runners on top sides of roof for very heavy rain & wind
sleeping room for 6 people – a double bed at each end & dining furniture converts to a double bed
strong steel bed supports (not thin alloy tubes like those used on some campers)
plywood floor & ceiling lining, chipboard seats & sink cabinet
3way Finch fridge: 240 volt, 12 volt & LPG (tested on 240 volt only)
240 volt power inlet, light & power points
metal 12 volt battery holder under seat (charge battery when towing)
water tank under seat
sink with water-pump & sink cover
electric overhead fluorescent light
LPG 2 burner stove with stand & regulator
foam mattresses & seats in very good, used condition
curtains for exterior windows
lots of storage space under the seats
door converts to mesh or full canvas cover
large, light mesh windows with weatherproof plastic exterior covers in living area
large mesh windows with canvas exterior covers next to beds for excellent air-flow when sleeping or resting
spare tyre held in rack underneath (tyre being replaced when pics were taken)
comes with free tool bag & all tools needed
currently insured for $6,900
all non-smoking owners

 

minor maintenance & repairs

there are some minor holes in the canvas which could be easily repaired. Doesn't leak.
small tear on front bed canvas passenger side where it pulls out
two zip heads could be re-fitted on one exterior plastic & a rear bed
area canvas window. We have one of the zipper heads
one stabilizer leg needs the nut spot welded back on to the leg guide
one piece of wood at the front of the trailer needs replacing with a piece of treated pine (front where black gaffer's tape is weatherproofing)

 

has had a thorough mechanical inspection to pass the blue slip for registration in NSW 2 years ago
rust proofed with rust converter & Penetrol
exterior exposed steel has been painted with 2 coats of silver rust proofing paint
exterior cladding has been painted with three coats of high quality Permalast weatherproof white enamel
Before & after photos available, so you can see what's under the paint.

rego no: U70068
registed to: 21st August 2010
chassis no:: TR410058416
Tare weight: 600 kilos
GVM: 650 kilos